 |
The LFC Series SkidWeigh Plus System is an electronic device that can be installed on any large capacity lift truck in order to convert it into a mobile check weighing scale. When the operator activates the "W" key and the load is picked up, the hydraulic pressure on the lift truck is automatically activated and converted to a weight measurement and presented to the operator visually via an LCD display, 2 lines x 16 characters. In addition to it’s check weighing
capability, the system allows the operator to enter the Waybill
ID#, accumulate load weights under designated Waybill ID#’s, enter
tare value into the system and obtain printout tickets if the on-board
printer is connected to the monitor. For example, over 10,000 lbs. - 100,000 lbs. |
Electronic Digital
LCD Display System
Large Forklift On-board Weight Verification
Lift-O-Graph ECCR-125 Series
Material Handling Vehicle Lift Activity Data Recorder in % of Vehicle Lifting Capacity
   
|
 
click image to enlarge it |
|
|
|
SKIDWEIGH PLUS REPORTS
Load
Weight Printout Ticket :
Date:
95/02/24
Time:
11:34
Oper.ID:
12011
Vehicle #:
102
Dept.#:
12
Way #:
17889
# of WRT:
4
Tot. Weight:
12015 lb
Technical Data :
Electrical : - Voltage: 12 to 55 V DC
Monitor Display :
- 2 lines x 16 characters LCD (supertwist)
- LED backlight
- Large character size (4.84 x 8.06 mm)
- Temperature range 0 ºC to 50 ºC
Environmental :
Operating temperature
- (-10 ºC to +50 ºC)
- Humidity up to 90%, no condensation
Enclosure :
- Water and dust resistant
- Machined aluminum
- Universal mounting bracket
Physical :
- Length: 242 mm
- Width: 151 mm
- Depth: 44 mm
- Weight: 1100 g
Alphanumeric Keyboard :
- Enlarged 16 key with tactile feedback
- Audible key signal during data entry
- Sealed keyboard, watertight
- Functions overlay
Status Indicators :
- System On
- Overload
- Lift 2
- Lift1
- Motion
- Transmitting
Scrolling Features :
- Allows overall status and session statistics to be displayed
Automatic Time-Out Function :
- Automatic recovery to user mode after 7 seconds if operator
does not complete input instructions
Real Time Clock :
- Continuous operation
- Hours / Minutes
- Year / Month / Day
Eprom :
- Up to 64 K bytes for application programs
Ram :
- Up to 128 K bytes for program and data storage
CPU :
- Intel 8032
Monitor Interface :
- Serial interface for printer
- Serial interface for IR, RF or link to PC
Communication :
- Automatic download of finished sessions
- Up to 9600 baud ( asynchronous )
Monitor calibration :
- External calibration via keypad with clear LCD instructions
in English ( No codes )
Calibration Security :
- Only a secure ID# to initiate the calibration mode
Swiss Made Pressure Sensors
Standard outside thread G 1/4 male, sealed at back DIN3852/E with pressure tip orifice
| Interference Stability | Test Standard | Effects |
| Electrostatic discharge (ESD) | EN 61000-4-2 15 kV air discharge, 6kV contact discharge | No effect |
| High- frequency electromagnetic radiation (HF) | EN 61000-4-6 200mV, 80....1000Mz | No effect |
| Conducted HF interferences | EN 61000-4-6 30V. 0,15...80 Mhz | No effect |
| Fast transients (burst) | EN 61000-4-4 4kV | No effect |
| Surge | EN-6100-4-5 Line-Line, Line-Case 500V, 12Ohm, 9µF | No failure |
| Magnetic fields | EN 6100-4-8 30A/m, 50 Hz | No effects |
| Insulation voltage | 500 V DC ( optional 1000 V DC ) | No effect |
| Interference emit | Test standard | Effects |
| Conducted interference Radiation from housing | EN 55022 0,15... 30Mhz 30... 1000Mhz, 10 meters | No emission
|
Pressure Transducer
Standard pressure port connection: G 1/4 , male thread standard
Pressure transducer adapter G1/4 to 1/4"-18 NPT male included in
kit
Optional pressure port : M 12x 1,5
Accuracy: +/- 0.3% of full scale
Repeatability: +/- 0.05% of full scale
Hysteresis: +/- 0.1% of full scale
Stability: +/- 0.2% full scale/yr
Temperature Information :
Compensation: 32° F to 175° F
Drift: +/- 0.03% /50 ° F
Medium: -22° F to 212° F
Ambient: 14° F to 175° F
Storage: -40° F to 212° F
Materials of Construction :
Casing: Stainless steel 1.4305 (AISI 303)
Weight :
95 grams
Shock Sensitivity :
<+/- 0.05% full scale @ 100g for 20 ms
Vibration Sensitivity :
<+/- 0.05% full scale @ 35g & 5-2000Hz
Response Time : < 0.1 ms, 10-90% FS
Frequency Limit : 150 Hz
Proof Pressure, 2,5 x range
Burst Pressure, 2,5 x range
Output, 3 wires 0 - 2,5 V DC
Protection :
Environmental: IP67
Fault :
Reverse polarity
Over voltage
Short circuit
Order Guide:
SP-1000 - LFC Standard Unit
SP-1000 - LFC - 10 Standard Unit with 12V DC Printer
SP-1000 - LFC - 20 Standard Unit with 24-48V DC Printer
SkidWeigh Plus Calibration
Procedure
Patented Technology USA 4,757,712; 4,949,263 Canada 1302566;
1304479 Australia 598,376; 605,647 Germany 38811280.0; 3887754.6 EC
0293697; 0351453
+ ED2 SkidWeigh |