|
The
SkidWeigh Plus SkidWeigh System is a microprocessor based on-board check
weighing system designed to be connected to the electronic pressure
transducer installed in the hydraulic lift circuit of the material handling
vehicle.
Simple setup
procedures are done through the keypad. The calibration of the
weighing function is done automatically by lifting empty forks
and loaded forks just above the ground. All operating and calibration instructions
are shown in English language and are displayed on the LCD display.
Sample
of the LCD Messages
SP-1000 SkidWeigh
Plus system check weighing accuracy is
within +/- .5 to 1% of the vehicle's lift capacity. |
 
 
 
 
 |
SP-1000
Series
-
Saves time consuming trips to
and from fixed scales
-
Saves time through stock inventory
taking by weight
-
Prevents overloading of lift
trucks and racking
-
Check weights of incoming suppliers
and outgoing products
-
Freight weight verification
-
Will not reduce lifting capacity
of the vehicle
-
Helps reduce truck wear and tear
-
Can be installed on any material
handling vehicle
|
Load
Weight Printout Ticket
Date: 07/02/24
Time:
11:34
Oper.ID:
12011
Vehicle #:
102
Dept.#:
12
Way #: 17889
# of WRT:
4
Tot. Weight:
1215 lb
Active
Session Stats Printout Ticket
Date:
07/02/24
Time:
11:47
Oper.ID:
12011
Vehicle#:
102
Dept.#:
12
Login:
08/34/57
Session Time: 03:13:23
St Time Unld:
00:37:33
St Time Ldd:
00:53:11
Dr Time Unld:
01:30:16
Dr Time Ldd:
01:31:34
Total Lft Time: 00:08:44
# Low Lifts: 17
# Med Lifts 47
# High Lifts:
4
Wght Lifted:
36240 lb
# W Readings: 34
Closed
Session Stats Printout Ticket
Date:
07/02/24
Time:
17:04
Oper.ID:
12011
Vehicle#:
102
Dept.#:
12
Login:
08/34/57
Logout:
17:04
Session Time: 08:29:37
St Time Unld: 01:23:45
St Time Ldd:
01:30:18
Dr Time Unld: 02:12:56
Dr Time Ldd:
02:46:32
Tot Lft Time:
00:36:56
# Low Lifts: 178
# Med Lifts:
104
# High Lifts:
41
Wght Lifted:
72890 lb
# W Readings:
133
Waybill
Report
Way #:
5578
# of WRT:
4
Tot. Weight: 12400
Way #:
5579
# of WRT:
2
Tot. Weight:
4360
Way #:
5580
# of WRT: 12
Tot. Weight:
18700
etc.
Technical
Data
Electrical
- Voltage: 12 to 55 V DC
Monitor Display
- 2 lines x 16 characters LCD (super twist )
- LED backlight
- Large character size (4.84 x 8.06 mm)
- Temperature range 0 ºC to 50 ºC
Environmental
Operating temperature
- (-10 ºC to +50 ºC)
- Humidity up to 90%, no condensation
Enclosure
- Water and dust resistant
- Machined aluminum
- Universal mounting bracket
Physical
- Length: 242 mm
- Width: 151 mm
- Depth: 44 mm
- Weight: 1100 g
Alphanumeric Keyboard
- Enlarged 16 key with tactile feedback
- Audible key signal during data entry
- Sealed keyboard, watertight
- Functions overlay
Status Indicators
- System On
- Overload ( Lift 3 )
- Lift 2
- Lift1
- Motion
- Transmitting
Scrolling Features
- Allows overall status and session statistics to be displayed
Automatic Time-Out Function
- Automatic recovery to user mode after 5 seconds if operator
does not complete the input instructions
Real Time Clock
- Continuous operation
- Hours / Minutes
- Year / Month / Day
EPROM
- Up to 64 K bytes for application programs
RAM
- Up to 128 K bytes for program and data storage
CPU
- Intel 8032/80C320
Monitor Interface
- Serial interface for printer
- Serial interface for IR, RF or cable link to PC
Communication
- Automatic download of finished sessions
- Up to 9600 baud ( asynchronous )
Monitor calibration
- External calibration via keypad with clear LCD instructions
in English ( No codes )
Calibration Security
- Only a secure ID# to initiate the calibration mode
Swiss Made Pressure Sensors
Standard
outside thread 1/4"-18 NPT, male thread with pressure
tip orifice
| Interference
Stability |
Test
Standard |
Effects |
| Electrostatic discharge (ESD) |
EN 61000-4-2
15 kV air discharge, 6kV contact discharge |
No effect |
| High- frequency electromagnetic radiation (HF) |
EN 61000-4-6
200mV, 80....1000Mz |
No effect |
| Conducted HF interferences |
EN 61000-4-6
30V. 0,15...80 Mhz |
No effect |
| Fast transients (burst) |
EN 61000-4-4
4kV |
No effect |
| Surge |
EN-6100-4-5
Line-Line, Line-Case 500V, 12Ohm, 9µF |
No failure |
| Magnetic fields |
EN 6100-4-8
30A/m, 50 Hz |
No effects |
| Insulation voltage |
500 V DC ( optional 1000 V DC ) |
No effect |
| Interference emit |
Test standard |
Effects |
| Conducted interference Radiation from housing |
EN 55022
0,15... 30Mhz
30... 1000Mhz, 10 meters |
No emission
|
Pressure Transducer
Pressure transducer 1/4"-18 NPT male thread
Optional pressure port : M 12x 1,5
Accuracy: +/- 0.25% of full scale
Repeatability: +/- 0.05% of full scale
Hysteresis: +/- 0.1% of full scale
Stability: +/- 0.2% full scale/yr
Temperature Information :
Compensation: 32° F to 175° F
Drift: +/- 0.03% /50 ° F
Medium: -22° F to 212° F
Ambient: 14° F to 175° F
Storage: -40° F to 212° F
Materials of Construction :
Casing: Stainless steel 1.4305 (AISI 303)
Weight :
95 grams
Shock Sensitivity :
<+/- 0.05% full scale @ 100g for 20 ms
Vibration Sensitivity :
<+/- 0.05% full scale @ 35g & 5-2000Hz
Response Time : < 0.1 ms, 10-90%
FS
Frequency Limit : 150 Hz
Proof Pressure, 2,5 x range
Burst Pressure, 2,5 x range
Output, 3 wires 0 - 2,5 V DC
Protection :
Environmental: IP67
Fault :
Reverse polarity
Over voltage
Short circuit
Order Guide:
SP-1000
Standard Unit
SP-1000
- 10 Standard Unit with 12 V DC mini dot
matrix on-board printer
SP-1000
- 20 Standard Unit with 24-48 V DC mini dot
matrix on-board printer
SkidWeigh Plus Calibration Procedure
Patented Technology USA 4,757,712; 4,949,263 Canada
1302566; 1304479 Australia 598,376;605,647 Germany 38811280.0; 3887754.6
EC 0293697; 0351453
+ ED2 SkidWeigh |
| |
Integrated Visual Data Technology Inc.
Oakville, Ontario, Canada. Copyright © 1996-2008 |
